Casio Exilim EX-Z1080 User Manual page 174

6.
Press [ ] to perform the required cut
operation(s).
For this type of cut
operation:
Cut
(To-Point Cut)
Cut
(From-Point Cut)
Cut
(Point-To-Point Cut)
Do this:
Select the point up to which you
want to cut and then press [ ].
Select the point from which you
want to cut and then press [ ].
1. Select the start point of the
center segment and then
press [ ].
2. Select the end point of the
center segment and then
press [ ].
7.
In response to the confirmation message that
appears, use [ ] and [ ] to select "Yes" and
then press [SET].
• To cancel movie editing, select "No" instead of "Yes" and
then press [SET]. This will return to the paused movie
playback screen.
• The selected cut operation will take considerable time to
complete. Wait until the "Busy... Please wait..." message
disappears from the monitor screen before performing
any operation on the camera. Note that a cut operation
can take a very long time if the movie being edited is long.
174
EDITING IMAGES