Editing the Date and Time of an Image
Use the procedure in this section to change the date and time of
a previously recorded image.
1.
In the PLAY mode, use [ ] and [ ] to display
the image whose date and time you want to
edit.
2.
Press [MENU].
3.
On the "PLAY" tab, select "Date/Time" and
then press [ ].
4.
Set the date and the time you want.
To do this:
Change the value at the cursor
location
Move the cursor between settings
Toggle between 12-hour and 24-hour
timekeeping
5.
• The date and time stamped into an image using the Time
• You cannot edit the date and time of an image that is
• You can specify any date in the range of January 1, 1980 to
Do this:
Press [ ] or [ ].
Press [ ] or [ ].
Press [BS].
165
When all the settings are the way you want,
press [SET] to apply them.
• After editing the time and date, display the image to
confirm that the date and time are correct.
IMPORTANT!
Stamp feature cannot be edited (page 135).
protected. Unprotect the image and then edit the date and
time.
December 31, 2049.
EDITING IMAGES