Operation; First System Start; Preliminary Checks; System Start-Up - Hillrom Helion Main Unit R Instructions For Use Manual

Operation

5 Operation
5.1

First system start

5.2

Preliminary checks

5.3

System start-up

Step
1. Place your finger on the touch
button until the front LEDs turn
on.
The LEDs will start to flash.
38
The Helion Video Management System is delivered to the operator
by authorised installation technical personnel from VIDEOMED
S.r.l.
System commissioning requires the operator to be adequately
trained in the functional and visual controls, adjustments and
calibration, cleaning and maintenance of the system, and also in
the applicable user instructions.
Delivery of the Helion Video Management System is validated by a
document signed by the operator.
Once the system has been commissioned, the instructions
included in this manual are binding for the user.
Before each use, check the components of the control screen in
terms of:
– monitor assembly stability;
– loose parts on the monitor body;
– visible damage, in particular abrasion of plastic surfaces or
damage to paint.
Cleaning is carried out during maintenance.
In order to start the system, proceed as follows:
Image
80028681_002_C – 774259 – 2021-09-01