Advertisement
Other Play Methods
Program Play
While stopped, press [:] or
1
[9] to select the track.
You can skip albums when
programming MP3 tracks ( ➪ below).
2
Press [MEMO] to register.
Track number
3
Sequence
01
number
M
3
Repeat steps 1 and 2 to
register up to 20 tracks.
4
Press [1/;] to start play.
Changing the sound quality
Each time you press [EQ]
Boosts the
Enhanced
bass
S-XBS
No display (canceled)
≥The effect may differ between different kinds of music.
Playing MP3
Starting play from an album (Album skip)
Press and hold [:] or [9] until the album you want
appears.
ALBUM
3
Album number
TRACK
10
Number of tracks
Playing only the tracks in a selected album (Album mode)
Each time you press and hold [MODE]
Main unit
ALBUM
Album mode
≥You can select another album with album skip ( ➪ above).
≥You cannot turn album mode on during program play.
Enjoying even more natural sound (Digital Re-master)
You can regenerate signal frequency lost during compression, restoring to near
pre-compression form.
While stopped, each time you press and hold [MEMO]
Main unit
Sound enhanced
When Playing MP3
01
Sequence
M
number
ALBUM
3
Album number
TRACK
1
Track number
M
∫ To confirm the contents
of the program
∫Press [MEMO] while the disc is
playing.
∫ To cancel program play
Press [∫].
∫
Main unit
Concert hall-
like sound
Main unit
No display
(canceled)
No display (canceled)
Conserves battery life
Play modes
Each time you press [MODE]
Main unit
RANDOM
One track
All track
Random
repeat
repeat
No display (canceled)
∫ Specifying the AB segment
Press [MEMO] at the start point (A) and once more at the end point (B).
≥Stop or skip ( ➪ page 5) to cancel.
≥If you do not specify point B and reach the end of disc, point B is set
automatically and repeat begins. You can also specify point B again by pressing
[MEMO].
≥You cannot select "RANDOM"and "A ` B" while playing MP3.
Anti-Skip System
This system reduces skipping caused by vibration to a minimum.
You can change the anti-skip memory time for CD-DA to improve sound quality.
While stopped, each time you press and hold [MEMO]
Main unit
Sound enhanced mode,
10-second anti-skip memory
≥You cannot change the memory time for MP3. It is a maximum of 100 seconds
for data recorded at 128 kbps.
Changing the remote control operation tone
Each time you press and hold [EQ]
This unit can play MP3, a method of compressing audio without overtly hurting
audio quality.
∫ When creating MP3 files to play on this unit
Disc formats: ISO9660 level 1 and level 2 (except for extended formats)
CD-ROM drive
001album
1
001track. mp3
002track. mp3
003track. MP3
002album
2
004track.mp3
005track.mp3
004album
3
008track.MP3
009track.MP3
003album
4
006track.mp3
007track.MP3
∫ Limitations on MP3
≥This unit is compatible with multi-session but if there are a lot of sessions it
takes more time for play to start. Keep the number of sessions to a minimum to
avoid this.
≥This unit cannot play files recorded using packet write.
≥If a CD-ROM format CD contains MP3 and files other than MP3, only the MP3
files will be playable.
≥Depending on how you create MP3 files, they may not play in the order you
numbered them or may not play at all.
6
RANDOM
Random repeat
AB repeat (AB specified
segment repeat) ( ➪ below)
Anti-skip enhanced mode,
45-second anti-skip memory
bP oFF
Tone off
Naming tracks and albums
Prefix with 3-digit numbers in the order you want to play
Extension
001track.mp3
( or.MP3 )
Up to 30 characters
If you created an album such as 004album on
the left, the files may not play in name order.
The albums would play in the order 1, 2,
3, 4.
During play
or
While paused
A
B
bP on
Tone on
RQT7652
Advertisement
