Configuring Display Language, Date, and Time Settings
Lens Cover
Zoom Controller
The settings on this page are required the first time you turn on
the camera after purchasing it.
• If you make a mistake when configuring the language, date,
and time settings, you can change the settings (pages 210,
214).
[ ]
[ ]
[ ]
[SET]
[ ]
1.
Slide open the lens cover to turn on the
camera.
• Take care that you do not touch the lens when sliding the
lens cover.
2.
Use [ ], [ ], [ ], and [ ] to select the
language you want and then press [SET].
3.
Use [ ], [ ], [ ], and [ ] to select the area
where you will use the camera and then press
[SET].
4.
Use [ ] and [ ] to select the city where you
will use the camera and then press [SET].
5.
Use [ ] and [ ] to select the summer time
(DST) setting you want and then press [SET].
11
(pages 210, 214)
QUICK START BASICS