Petzl I'D S Manual
Self-braking descender / belay device
Hide thumbs
Also See for I'D S:
- Manual (24 pages) ,
- Quick start manual (11 pages) ,
- Inspection procedure (5 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Petzl I'D S
Summary of Contents for Petzl I'D S
- Page 1 TECHNICAL NOTICE I’D S D0000900A (010616)
- Page 2 TECHNICAL NOTICE I’D S D0000900A (010616)
- Page 3 TECHNICAL NOTICE I’D S D0000900A (010616)
- Page 4 TECHNICAL NOTICE I’D S D0000900A (010616)
- Page 5 권장한다(사용 국가의 현재 규정과 사용자의사용 환경에 따를 것). 작업 로프 상에서 텐션을 받은 상태라면 안전 로프에 하중이 실리지 페츨의 웹사이트 Petzl.com에 설명된 절차를 따른다. PPE 장비 서식에 않도록 해야 한다. 유형, 모델, 제조자 정보, 일련번호 또는 개별 번호, 제조일, 구매일, 동적...
- Page 6 Latest version Other languages [Bluewater Ropes, Spec-Static 13mm] PETZL PETZL AMERICA After removing the notice from the equipment, make a copy of it and keep the ZI Cidex 105A PO Box 160447 original as part of a permanent record that includes the usage and inspection...
-
Page 7: Field Of Application
Field of Application. additional dangers. Contact Activities involving the use of this equipment are This product must only be used by competent Petzl if you have any doubts inherently dangerous. and responsible persons, or those placed under or difficulty understanding... - Page 8 (2). By holding the brake side of the rope, Contact Petzl if you are uncertain the brake hand helps engage the cam. about the compatibility of your equipment.
-
Page 9: Function Test
Function test Before each use, verify that to slide: the rope is correctly installed - Descent is possible = rope and that the device is correctly installed. working properly. You must - Descent is impossible = always use a backup safety check the installation of the system when performing rope (rope locked by the... - Page 10 EN 12841: 2006 Type C 8B. Work positioning - secured stop After stopping at the desired location, to switch to the hands-free work positioning mode, lock the device on the rope by moving the handle in the direction opposite to that used for descent (turned to position b). For work positioning, the I’D must be set in this position.
-
Page 11: Other Use
Other use Occasional rope climbing Device attached to the harness (position c or d). For greater efficiency, take up slack as you stand up using the rope clamp (B17). Never allow slack between the rope clamp and the I’D. Heavy loads, exceptional uses for experts only 12A. - Page 12 - The anchor point for the system - WARNING - DANGER: take care intensity of usage and the environment repairs (prohibited outside of Petzl should preferably be located above the that your products do not rub against of usage (harsh environments, marine facilities, except replacement parts) - I.
- Page 13 위치)로 올린다. 제동은 로프를 잡는 힘에 의해 조절한다. 자동 잠금 Petzl.com/ppe을 방문하여 확인한다. 기능을 사용하기 위해 핸들을 풀어준다. 제품 상태에 관한 궁금한 점은 Petzl에 연락할 수 있다. 경고: 제품의 수명은 제품의 형태, 사용 강도 및 사용 환경에 따라 단 장비에 가볍게 하중이 실렸을 때, 패닉 브래이크가 너무 쉽게...
Need help?
Do you have a question about the I'D S and is the answer not in the manual?
Questions and answers
Do you require a slip knot in the break line when ID is left unattended. Or at anytime? In the transition from a lower to a haul would one be required? If so what is its intended purpose?