Saswell SASWG-01-RF-WIFI User Manual page 42

Adding the receiver to the gateway: The gateway must be in pairing mode (RF light is
3
on) now turn off the receiver, so that the red indicator is not turned on. Now hold the
button for about 5 seconds so that the yellow indicator turns on. The receiver is now
in pairing mode. After the devices pair / connect, the same indicator will flash a few
times and turn off. Pairing is successful.
yellow light
flash slowly
26
To exit the pairing / connecting mode of the gateway, short press the pairing
4
button and the LED indicator on RF should turn off.
Short press to exit connecting mode
AP/WIFI RF
ON/OFF
27