Zoef Robot Dirk User Manual page 103

PIN code
PIN code should be entered after power-
ing on, pressing STOP button, and before
clearing error status and changing PIN
code.
If the PIN code is incorrect, the screen
will show " PIN wrong, please retry
If the PIN code is entered incorrectly 3
times, the screen will be locked for 15
seconds. The lock time will double for
further incorrect entries.
Factory reset
Press OK button to enter sub-menu 1.
Select ' s etting' to enter sub-menu 2.
Select ' f actory reset'.
The screen shows Reset to factory
mode?
Press OK button to confirm.
In the event of malfunction the error log will record all actions and can be used for
service maintenance and fault finding.
Change PIN code
Press OK button to enter sub-menu 1.
Select ' s etting' to enter sub-menu 2.
Select ' c hange PIN
Enter the original PIN code.
Enter new PIN code.
Enter the new PIN code again. ('New
passwords do not match' will be shown for
inconsistent passwords.)
Press OK button to confirm.
Error log
1. Press OK button to enter sub-menu 1.
2. Select ' setting' to enter sub-menu 2.
3. Select ' i nformation ' to enter sub-menu 3.
4. Select ' error log
5. The past 10 records (including date,
time and error message) will be shown.
- 21 -
User Manual