Advertisement
https://appliancetechmanuals.com
Prodigy Eclipseä 600, 800, 1000
18
Thoroughly wash all surfaces of the ice
thickness sensor, water level sensor, curtain
and water distributor with the sanitizer
solution.
19
Thoroughly wash all interior surfaces of the
freezing compartment, including evaporator
frames, evaporator cover and the part of the
top panel covering the freezing compartment
with the sanitizer solution.
20
Return water level sensor, ice thickness
sensor, water distributors and curtains to their
normal positions. Be sure hose is reattached
to water distributor.
21
Push and hold the clean button to drain the
reservoir. Push and release the clean button
again and when the purge valve indicator light
goes out, immediately pour the remaining
cleaning solution into the reservoir.
22
Circulate the sanitizer solution for 10 minutes,
then push and release the Clean button.
23
Allow the water system to be flushed of
sanitizer for at least 20 minutes, then push
and release the Off button.
24
Return the evaporator cover and front panel
to their normal position and secure with the
original fasteners.
25
Push and release the On button to resume
ice making.
February 2008
Page 42
Advertisement
