Advertisement
https://appliancetechmanuals.com
Ice making section:
Located at the top panel:
·
Refrigeration quick connects.
·
Interconnecting control wire.
·
Access port for water supply.
·
Power cord.
The drain may be routed to the left or right,
allowing the ice making section to be placed with
its back tight against a wall.
Remove from carton.
Place adapter kit onto bin or dispenser top. If
adapter does NOT have gasket tape install tape
such as Scotsman part number 19-0503-04.
Prodigy Eclipseä 600, 800, 1000
Attachment:
ABS (Automatic Beverage Dispenser) in drive
up installations: Route refrigerant tubing and
install drain and water supply tubing onto ice
making section before placing unit on the
dispenser.
Place EH222 onto adapter, do not secure at this
time. Uncoil power cord and route to the power
supply. Plug interconnecting control wire to the
wire harness in the ice making section.
Do not secure unit to adapter at this time.
February 2008
Page 19
Advertisement
