Carton Contents - Craftsman C944.417341 Instruction Manual

S Either of these reactions may cause
you to lose control of the saw which
could result in serious injury. Do not
rely exclusively upon safety devices
built into your saw.
Computed kickback angle (CKA) Table
MODEL
P/N
C944.417341 71--36365
SAFETY NOTICE: Exposure to vibra-
tions through prolonged use of hand
tools could cause blood vessel or
nerve damage in the fingers, hands,
and joints of people prone to
circulation disorders or abnormal
swelling. Prolonged use in cold weath-
er has been linked to blood vessel
damage in otherwise healthy people. If
symptoms occur such as numbness,
pain, loss of strength, change in skin
color or texture, or loss of feeling in the
fingers, hands, or joints, discontinue
the use of this tool and seek medical
attention. An anti-vibration system
does not guarantee the avoidance of
these problems. Users who operate
power tools on a continual and regular
basis must closely monitor their physi-
cal condition and the condition of this
tool.
DOUBLE INSULATION
CONSTRUCTION
This unit is double insulated to help
protect against electric shock. Double
insulation construction consists of two
separate "layers" of electrical insula-
tion instead of grounding.
Tools built with this insulation system
are not intended to be grounded. No
grounding means is provided on this

CARTON CONTENTS

Check carton contents against the fol-
lowing list.
Model C944.417341
S Chain Saw (fully assembled)
S Bar Sheath
Examine parts for damage. Do not use
damaged parts.
The following guide bar and chain
combinations meet kickback require-
ments of CSA Z62.1 & Z62.3 when
used on saws listed in this manual.
Use of bar and chain combinations
other than those listed is not recom-
mended and may not meet the CKA
requirements per standard.
BAR
CHAIN P/N
Length
14! 71--3617
unit, nor should a means of grounding
be added to this unit. As a result, the
extension cord used with this unit can
be plugged into any standard120 volt
electrical outlet.
Safety precautions must be observed
when operating any electrical tool. The
double insulation system only provides
added protection against injury result-
ing from an internal electrical insulation
failure.
STANDARDS: This product is listed by
Underwriters Laboratories, Inc. in ac-
cordance with UL Standard 1662 and
CSA Standards Z62.1 and Z62.3 and
ANSI B175.1.
ANSI B175.1- -1991 "American Nation-
al Standard for Powered Tools - - Safe-
ty Requirements"
CSA Z62.1 "Chain Saws - - Occupa-
tional Health and Safety"
CSA Z62.3 "Chain Saw Kickback Oc-
cupational Health and Safety"
SAVE THESE INSTRUCTIONS
THIS CHAIN SAW IS FOR
OCCASIONAL USE ONLY
ASSEMBLY
NOTE: If you need assistance or find
parts missing or damaged, please call
1-800-235-5878
ASSEMBLY
Your saw is fully assembled; no
assembly is necessary.
7
CKA without
chain brake
24_