Maintenance; Cleaning And Care; Cleaning The Cabinet; Cleaning The Inlet Filter - Midea MJ70N68P Owner's Manual

Table of Contents

Advertisement

MAINTENANCE

Cleaning and care

Warning!
• Before maintenance starts, please unplug the machine and close the tap.

Cleaning the cabinet

Proper maintenance on the washing machine can extend its
working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is
any water overflow, use wet cloth to wipe it off immediately.
No sharp items are allowed to clean the cabinet.
Note!
Formic acid and its diluted solvents or equivalent are forbidden, such as
alcohol,
solvents or chemical products,etc.

Cleaning the inlet filter

Note!
• Inlet filter must be cleaned if the water inflow is slow.
Washing the
filter :
inlet
1.
Screw off the inlet pipe from the backside
of the machine.
2.Pull out the filter with long nose pliers
and reinstall it back after being washed.
3.Use
the brush
to clean the filter.
4.Reconnect the inlet pipe.
Cleaning the lint filter
1.There is a built-in lint filter in your washer. It
can help to collect lint during washing cycle.
2.It is suggested to clean the lint filter every
10 cycles.
3.Take
the filter
out and clean it with water.
Then place it back into the washer.
magic filter
normal filter
10
17

Advertisement

Table of Contents
loading

Table of Contents