Selection Of Tap; Connection Of Inlet Hose, Tap And Washing Machine - Midea MJ70N68P Owner's Manual

INSTALLATION

Selection of tap

Please select appropriate
tap.

Connection of inlet hose, tap and washing machine

1:Connection between ordinary tap and inlet hose.
Clamp nut
1.Loosen the clamp
nut to show 5mm
thread
slide bushing
5.Press slide bushing,
insert inlet hose into
connecting base
2:connection between screw tap / special washing machine tap and inlet hose.
Screw tap and inlet hose
Warning!
• To prevent water leakage or damage, follow the instructions in this chapter
• Do not kink, crush, modify or sever the
Ordinary tap
2.Loosen four bolts
6.Connection finished
Screw tap
Wall
Tap
3.Set connecting base
on tap and tighten
bolts evenly
inlet hose
inlet valve
7.After connection and installation,
check if there is water leakage
Special washing machine tap and inlet hose
water inlet hose
9 10
Special washing
machine tap
4.Tighten the clamp nut
.
!