Washing Program Table - Midea MJ70N68P Owner's Manual

OPERATIONS

Washing program table

Programs are available according to the laundry type.
XXXX XXXX
Only for washers having these functions.
XXXX XXXX
XXXX XXXX Program
XXXX XXXX
Jeans
Quick 15'
Delicate
Mix
Normal
(Standard)
Strong
Intensive
FCS
Fuzzy
weighting
i-clean
Suitable to wash stained Jeans
Suitable to wash light stained clothes and summer
The tempo is soft, with slow washing and spinning speed, to make the
lightest wear and deformation.
Suitable to wash cotton ,linen ,flax ,jute clothes .
Standard fabric washing program, suitable to wash ramie cotton fabric.
Wash for once, rinsing for twice. The spin time is a little bit long.
The washing time is longer, the stream is stronger, so the washing
performance is better.
Suitable to wash heavy stained/wearable clothes.
Start up Fast Clean Stystem : Power on, select "Normal",
" Intensive ","Mix","Strong","Jeans" program, then press FCS
button. Then press "Start/Pause" button, FCS function starts
up. The relative figures will be showed after FCS function starts up.
Cancellation of FCS function: when the FCS function was selected,
The function can be cancelled by pressing FCS button again or
power off.
The washing machine will select the water level automatically
according to the load weight.
1. If [Start/Pause] button is pressed without any [water level]
selected,the washing machine will run the fuzzy weighting
function.
2. When there's water in the drum, this function is not available,
consumer can also select the water level to set the water level as
needed.
Automatic cleaning Function
/wearable clothes.
10
16
clothing .