Emptying The Coin Box; Deleting Credit; Totaliser - V-ZUG CoinSystem 1 Operating Instructions Manual

3 Operation
▸ Insert the coins while the display is flashing.
– The current credit is shown in the display.
3.2

Emptying the coin box

Coins accepted by the coin validator drop into the coin box. It can hold approximately
400 coins. If a coin is not validated, it automatically drops into the return slot.
▸ Use the key to remove the coin box
cover 1.
▸ Remove the coin box 2, empty it and
then put it back.
▸ As a check, read off the totaliser.
▸ Put the coin box cover 1 back and lock.
3.3

Deleting credit

Example: You have a credit of
▸ Press the «+» and «–» settings buttons at the same time for about 6 seconds.
– The deleting process is shown in the display:
/
– The credit is deleted.
3.4

Totaliser

All the coins that have been inserted can be shown in the display.
▸ Press the «–» settings button for about 3 seconds.
– The total is shown in the display.
Model 245
If the total is greater than
«100s» and the «–» settings button can be used to show the «1s».
Model 246
The «100s» are shown in the display for appliance 1 and the «1s» are shown in the dis-
play for appliance 2. Example: the total amount given by the totaliser is 237.30.
– is shown in the display for appliance 1.
– is shown in the display for appliance 2.
▸ To exit, press the «SET» button for about 3 seconds.
The display also changes if:
▪ a settings button is not pressed for one minute,
▪ a coin is inserted,
▪ or an appliance is selected (model 246).
8
and would like to delete it.
.
, the «+» settings button can be used to show the
1
/
2
/ /