Panasonic BB-HCM331A Operating Instructions Manual page 38

Operating Instructions
Basic
(1) Network (IPv4) Configures the IPv4 network settings to connect the
(2) Network (IPv6) Configures the IPv6 network settings to connect the
(3) IPsec
(4) UPnP
(5) Viewnetcam.
com
(6) Date and Time
(7) Camera
(8) Audio
Account
(9) Administrator
(10) General User
Advanced
(11) Image Display
(12) Multi-Camera
If you change [Administrator], [General User], or [Multi-Camera Setup page] settings,
*1
changes will not be applied to the video (Motion JPEG) viewers. Restart the camera to make
changes applied to all video viewers.
38
camera to the network (see page 40).
camera to the network (see page 44).
Enables IPsec (Transport or Tunnel mode) (see page 48).
Enables automatic port forwarding or shortcut to the
camera (see page 58).
Registers with the Viewnetcam.com service (see page 60).
Sets the date and time, automatic time adjustment and
adjust clock for daylight saving time settings (see page 62).
Sets camera name, white balance, pan/tilt range, return to
specified position and color night view settings (see page
64).
Sets output, volume, PC audio input timeout, input, camera
microphone sensitivity and mute during pan/tilt settings
(see page 68).
Sets authentication setting and administrator security (user
*1
name and password) (see page 70).
Sets general user security (user name and password) and
*1
general user's access level (see page 74).
Sets resolution, image quality and refresh interval of Single
Camera and Multi-Camera page, time stamp setting, and
language (see page 76).
Sets the camera IP address or host name, camera name on
*1
the Multi-Camera page (maximum 12 cameras) (see page
79).