Fine Tuning; How To Cancel The Fine Tuning; Programme Number Skip - Panasonic TX-47P800H Operating Instructions Manual

Tuning Channels

Fine Tuning

Under normal reception conditions this function is not required or necessary.
However, in areas of poor reception or constant interference, a slight adjustment of the tuning may improve the picture and sound quality.
1
Press to select the FINE TUNE.
Press until the clear picture is received.
STR
2
Press to store the FINE TUNE.
This stores the FINE TUNE to the selected Programme Number.
TV/AV
3
Press to exit from the FINE TUNE.
This returns the set to the normal viewing condition.

How to Cancel the Fine Tuning

Canceling previously adjusted (manually) fine tuning, means
re-activating the AFT (Automatic Fine Tuning). Re-activating
the Automatic Fine Tuning means allowing the set to
automatically tune to the optimum tuning position, for that
programme Number.
1
Select the Programme Number
which you would like to return to
Automatic Fine Tuning (cancel the
manual fine tuning).
2
SET UP
Press to display the SETUP MENU.
Proceed to the TUNING MENU
(refer to page 16).
3
Press to select the MANUAL TUNE.
Press to access to MANUAL TUNE.
Press briefly to tune the best
position.
STR
4
Press to store the AFT.
This stores the re-activated AFT.
TV/AV
5
Press to exit from the MANUAL TUNE.
This returns the set to the normal
viewing condition.
20
TUNING MENU
SYS SELECT AUSTRALIA
AUTO TUNE
ACCESS
MANUAL TUNE
SOUND SYS 5. 5 MHz
COLOUR SYS AUTO
FINE TUNE
SKIP OFF

Programme Number Skip

It is possible to skip Programme Number on which no TV stations
are tuned appearing on the screen. The function is only effective
when selecting Programme Numbers by pressing the Programme
Number Up or Down button either on the TV set or on the Remote
control.
Under the normal viewing condition
1
press to select the Programme
Number you would like to skip.
SET UP
2
Press to display the SETUP MENU.
Proceed to the TUNING MENU
(refer to page 15).
3
Press to select the SKIP.
Press to change the mode to "ON".
4 STR
Press to store the Skip function.
TV/AV
Press to exit from the SKIP.
This returns the set to the normal
viewing condition.
1
5
Repeat Step1 to 4 for each
4 2
Programme Number for which the
3
Skip function is desired.
TUNING MENU
SYS SELECT AUSTRALIA
AUTO TUNE
MANUAL TUNE
SOUND SYS 5. 5 MHz
COLOUR SYS
AUTO
FINE TUNE
SKIP OFF
TUNING MENU
SYS SELECT AUSTRALIA
AUTO TUNE
MANUAL TUNE
SOUND SYS 5. 5 MHz
COLOUR SYS AUTO
FINE TUNE
SKIP ON