Tuning Channels
Fine Tuning
Under normal reception conditions this function is not required or necessary.
However, in areas of poor reception or constant interference, a slight adjustment of the tuning may improve the
picture and sound quality.
1
STR
2
TV/AV
3
How to Cancel the Fine Tuning
Cancelling previously adjusted (manually) fine tuning, means re-activating the AFT (Automatic Fine Tuning).
Re-Activating the Automatic Fine Tuning means allowing the set to automatically tune to the optimum tuning position,
for that Programme Number.
1
SET UP
2
3
STR
4
TV/AV
5
22
Press to select the FINE TUNE.
Press until the clear picture is received.
Press to store the FINE TUNE.
This stores the FINE TUNE to the selected Programme Number.
Press to exit from the FINE TUNE.
This returns the set to the normal viewing condition.
Select the Programme Number which you would like to return to Automatic Fine Tuning
(cancel the manual fine tuning).
Press to display the SETUP MENU.
Proceed to the TUNING MENU (refer to page 19).
Press to select the MANUAL TUNE.
Press to access to MANUAL TUNE.
Press briefly to tune the best position.
Press to store the AFT.
This stores the re-activated AFT.
Press to exit from the MANUAL TUNE.
This returns the set to the normal viewing condition.
TUNING MENU
SYS SELECT
AUSTRALIA
AUTO TUNE
MANUAL TUNE
SOUND SYS
5. 5 MHz
COLOUR SYS
AUTO
FINE TUNE
SKIP
OFF
TUNING MENU
SYS SELECT
AUSTRALIA
AUTO TUNE
MANUAL TUNE
ACCESS
SOUND SYS
5. 5 MHz
COLOUR SYS
AUTO
FINE TUNE
SKIP
OFF