Panasonic TX-47P800H Operating Instructions Manual page 25

C. TEMP (Colour Temperature)
Set the overall colour tone of the picture.
Press to switch between modes
P-NR (Picture Noise Reduction)
Automatically reduces undesired picture noise.
Press to switch between modes
AI (Artificial intelligence)
Automatically analyses the incoming picture and processes
it to give improved contrast and optimum depth of field.
SCAN MODE
When receiving PAL or SECAM Signal, SCAN MODE is
displayed.
Choose the screen refresh method:
Press to switch between modes
Switching is also possible using
Note:
When viewing a PAL transmission (other than PAL 60) with Scan mode set to Progressive, the screen
will flicker, this is not a fault.
Helpful Hint (
By pressing the Normal "N" Button on the Remote Control while the Picture menu is displayed, the selected menu will be changed
to the Normal Mode.
Normalization will not occur if the menu is not displayed when the "N" Button is pressed.
The Normal mode is the factory preset condition. Returning to this original condition is called "Normalization".
STANDARD WARM
OFF STRONG
AUTO WEAK
ON OFF
100 Hz MODE
MODE
100Hz will give a steady picture for most signal transmission.
100 Hz MODE
Avoids "snaking/jaggy" effect when viewing TV program with
PROGRESSIVE
moving characters.
Normalization)
N
COOL
PROGRESSIVE
Function
100Hz/
PROGRE
on the remote control.
Picture Adjustment
PICTURE
MENU STANDARD
CONTRAST
BRIGHTNESS
COLOUR
SHARPNESS
NTSC-TINT
C. TEMP STANDARD
PICTURE
P-NR AUTO
AI ON
PICTURE
P-NR AUTO
AI ON
PICTURE
AI ON
SCAN MODE 100 Hz
When receiving PAL or
SECAM Signal
25