Table of Contents
Advertisement
2.7
Updating wireless projection firmware
1.
Make sure that the monitor connects to the Internet.
2.
After the monitor successfully connects to the Internet, new IP address will
be assigned to the monitor and displayed on the upper right corner of the
monitor.
3.
Connect your device to the same WiFi network as the monitor.
4.
Open the web browser on your device and go to the IP address of the monitor
(displayed on the upper right corner of the monitor). If there's newer version
of firmware available, click OK to start the update.
5.
Once confirmed, the monitor will start the process and reboot itself when
finished.
ASUS Wireless Portable Monitor MB16A
2-5
Advertisement
Table of Contents
