Table of Contents
Advertisement
Getting Started
1-D Belt Clip
You can hang the handset on your belt or pocket
using the belt clip.
To attach the belt clip
To remove the belt clip
2
Making/Answering Calls
• For best operating performance, see
section 6-C.
Lighted handset keypad
The handset dialling buttons will light
when you press a button or lift the
handset off the base unit, and flash when
a call is received. The lights will go out a
few seconds.
1-E Optional Headset
Plugging an optional headset into the handset allows a hands-free phone conversation. Please use only
the Panasonic KX-TCA88AL headset.
Only telecommunications compliance labelled headsets should be plugged into the headset jack
on the handset.
Connecting the optional headset to the handset
Open the headset jack cover, and connect the optional headset to the headset jack
as shown.
When the optional headset is connected to the handset, make sure to use the headset to talk with
the caller. If you want to have a normal cordless phone conversation, disconnect the headset.
2
2
1
1
6
6
5
5
4
4
2-A Making Calls
1
Press
.
(TALK)
•The TALK indicator lights.
•If an alarm tone sounds, see 6-E.
2
Dial a phone number.
3
To hang up, press
(TALK)
the handset on the base unit.
•The indicator light goes out.
To redial the last number dialled
\
Press
.
(TALK)
(REDIAL)
To select the receiver volume
3 levels (HIGH, MEDIUM, LOW) are available.
Press
or
while talking.
Ñ
Ö
•Each time you press
or
Ñ
Ö
level will change.
If noise interferes with the
conversation
Press
to select a clearer channel or move
(CH)
closer to the base unit.
H
2-B Answering Calls
If the handset is off the base unit,
press
(TALK)
•You can also answer a call by pressing any dialling
button
(0)
OR
or place
If on the base unit, just lift up.
Selecting the ringer volume
The TALK indicator light must be off.
•To select HIGH (preset) or LOW,
press
Ñ
Each time you press
change and the selected volume will ring.
•To turn the ringer OFF,
press and hold
, the volume
•To turn the ringer ON,
press
Ñ
The ringer will sound at the HIGH level.
•When you replace the battery, the selected ringer
volume setting will return to the factory set.
Section 1
Headset Jack
Section 2
.
to
,
or
(— Any Key Talk).
(9)
(*)
(#)
or
.
Ö
or
, the ringer volume will
Ñ
Ö
until 2 beeps sound.
Ö
.
Advertisement
Table of Contents
