3M Aqua-Pure AP1610SS Manual

Spec #
Quantity
Applications:
• Sediment / Rust
• Chlorine Taste & Odor
AP2610SS
AP1610SS
Product Specifi cations:
Inlet/
Model No.
Outlet
(Part No.)
Size
Height Diameter
AP1610SS 12-7/32"
(5592002) (31 cm)
3/4"
NPT
AP2610SS 22-1/32"
(5592003) (56 cm)
Product Benefi ts:
• Heavy-duty 316 stainless steel head and 304 stainless steel housing rated to 300
psi (2,069 kPa) maximum operating pressure for maximum strength and durability
• Premium performance, high effi ciency AP110 progressive porosity depth cartridge
• Manufactured from FDA CFR-21 compliant materials
• High Flow, dual cartridge AP2610SS model for high water demand applications and
less frequent cartridge changes
• 3/4" unrestricted fl ow design for high fl ow rates with minimal pressure drop
• "Sure-Seal" ring nut connector with tightening tool allowing for positive cartridge
sealing
• Complete installation manual is enclosed for easy reference and simple installation
*Dependent upon cartridge used
Dimensions
Flow
Rate
4-5/32" 8 gpm
(10.6 cm) (30.3 lpm) (13.8 kPa @ 30 lpm)
4-5/32" 16 gpm
(10.6 cm) (60.6 lpm) (27.6 kPa @ 61 lpm)
Models:
AP1610SS / AP2610SS
Stainless Steel Water Filters
At a Glance:
• Premium performance progressive porosity sediment cartridge(s)
• For hot and cold water applications
• 3/4" NPT Connections
Max.
Clean Pressure
Water
Drop
Temp. Pressure
2 psi @ 8 gpm
170°F
(76.7°C) (2,070 kPa)
4 psi @ 16 gpm
Max. Std.
Degree of
Water Replacement
Filtration
Ctg. No.
AP110
300 psi 5 Micron
Nominal
AP110 (Qty. 2)