Crown FM5 User Manual page 30

Processing
RF
S/N
Spurious products
Stability
Stereo Pilot
Stereo separation
Subcarrier
Suppression
THD
VSWR
Wideband
G-2
The procedure and/or circuits used to modify
incoming audio to make it suitable for transmission.
Radio Frequency;
(1) A specific portion of the electromagnetic
spectrum between audio-frequency and the infrared
portion.
(2) A frequency useful for radio transmission
(roughly 10 kHz and 100,000 MHz).
Signal to Noise
Unintended signals present on the transmission
output terminal.
A tolerance or measure of how well a component,
circuit, or system maintains constant operating
conditions over a period of time.
See "Pilot."
The amount of left channel information that bleeds
into the right channel (or vice versa).
A carrier signal which operates at a lower frequency
than the main carrier frequency and which
modulates the main carrier.
The process used to hold back or stop certain
frequencies.
Total Harmonic Distortion
Voltage Standing Wave Ratio; see "SWR."
See "Broadband."
FM5 User's Manual