Advertisement
I.R.K.
/
T
N
T
N
4
0
4
8
0
L
8
C
X
C
T
h
/
e
T
r
N
m
4
o
0
m
8
L
e
C
t
e
T
r
h
O
C
/
T
N
T
N
4
0
4
8
0
L
8
C
X
C
T
h
/
e
T
r
N
m
4
o
0
m
8
L
e
C
t
e
T
r
h
O
T
N
4
0
8
X
C
/
T
N
4
0
8
L
C
T
h
T
N
4
0
8
X
C
/
T
N
4
0
8
L
C
T
h
Infrared + Type K Thermocouple – Operating Instructions
Model: TN408XC, TN408LC (with Laser).
Model: TN408XC, TN408LC (with Laser).
The thermometer is a non-contact infrared thermometer. There are many mathematical modes for the Infrared function. Please
The thermometer is a non-contact infrared thermometer. There are many mathematical modes for the Infrared function. Please
remember to keep away from children and don't use it
remember to keep away from children and don't use it
for safety related applications.
for safety related applications.
(Default Screen)
(Default Screen)
(Default Screen)
Simply aim the thermometer at the measure target
Simply aim the thermometer at the measure target
) and press Meas. key (○
with Lens (○
) and press Meas. key (○
) to display
7
9
9
with Lens (○
) and press Meas. key (○
7
9
the surface temperature.
the surface temperature.
The Distance:Spot is 11:1. Please make sure the
12:1
The Distance:Spot is 11:1. Please make sure the
target area is within the field of view.
target area is within the field of view.
FUNCTION
FUNCTION
Press Emissivity key (○
) for setting the emissivity.
) for setting the emissivity.
1
1
Press Emissivity key (○
) for setting the emissivity.
1
Press Emissivity key (○
Press Emissivity key (○
), then press Up key (○
), then press Up key (○
) or Down key (○
1
1
4
Press Emissivity key (○
), then press Up key (○
1
(○
) to confirm it. The emissivity can be changed from 0.10 (10E) to 1 (100E).
(○
) to confirm it. The emissivity can be changed from 0.10 (10E) to 1 (100E).
5
5
(○
) to confirm it. The emissivity can be changed from 0.10 (10E) to 1 (100E).
5
) for scrolling more display function as follows.
Press Mode key (○
) for scrolling more display function as follows.
5
5
Press Mode key (○
) for scrolling more display function as follows.
5
Here will show the emissivity data. (The default emissivity is 0.95.)
Here will show the emissivity data. (The default emissivity is 0.95.)
Here will show the emissivity data. (The default emissivity is 0.95.)
Press Mode key (○
) for the Maximum (MAX), Minimum (MIN), Different between MAX and MIN (DIF) and
Press Mode key (○
) for the Maximum (MAX), Minimum (MIN), Different between MAX and MIN (DIF) and
5
5
Press Mode key (○
) for the Maximum (MAX), Minimum (MIN), Different between MAX and MIN (DIF) and
5
Average (AVG) modes. During the measurement, the special modes reading will be displayed beside the
Average (AVG) modes. During the measurement, the special modes reading will be displayed beside the
Average (AVG) modes. During the measurement, the special modes reading will be displayed beside the
mode icon.
mode icon.
mode icon.
) key to change the High Alarm (HAL) or Lo Alarm (LAL), then press Meas.
Press Up key (○
) or Down key (○
Press Up key (○
) or Down key (○
4
2
4
Press Up key (○
) or Down key (○
4
key (○
) to confirm it. For example: When the reading 27
key (○
) to confirm it. For example: When the reading 27
9
9
key (○
) to confirm it. For example: When the reading 27
9
a beep sound.
a beep sound.
a beep sound.
Connect the thermocouple with Thermocouple socket (○
Connect the thermocouple with Thermocouple socket (○
Connect the thermocouple with Thermocouple socket (○
display the temperature automatically without pressing any button. To see the minimum or maximum data during
display the temperature automatically without pressing any button. To see the minimum or maximum data during
display the temperature automatically without pressing any button. To see the minimum or maximum data during
the probe measurement, please hold down the Up key (○
the probe measurement, please hold down the Up key (○
the probe measurement, please hold down the Up key (○
After measure high temp, the probe may remain HOT for a while.
After measure high temp, the probe may remain HOT for a while.
After measuring high temps, the probe may remain HOT for a while.
After measure high temp, the probe may remain HOT for a while.
** The thermometer will automatically shut off if left idle for more than 60sec, unless in PRB mode. (In PRB mode, it will shut off if
** The thermometer will automatically shut off if left idle for more than 60sec, unless in PRB mode. (In PRB mode, it will shut off if
left idle for more than 12 minutes.)
left idle for more than 12 minutes.)
ADD VALUE
ADD VALUE
Press Up key (○
) for LOCK mode ON/OFF. The lock mode is particularly useful for continuous
Press Up key (○
4
4
Press Up key (○
4
In MAX, MIN, DIF, AVG
monitoring of temperatures for up to 60 minutes.
monitoring of temperatures for up to 60 minutes.
In MAX, MIN, DIF, AVG
monitoring of temperatures for up to 60 minutes.
mode:
mode:
Press Down key (○
) for
Press Down key (○
o
C or
o
F transferred.
2
Press Down key (○
and press Up key (○
) for backlight function ON/OFF.
and press Up key (○
In all modes: First
4
and press Up key (○
In all modes: First
hold on the Meas. key
hold on the Meas. key
(○
)
and press Down key (○
9
and press Down key (○
) for laser function ON/OFF. (only for model TN408LC.)
2
(○
)
9
and press Down key (○
Imported by
Imported by
e
p
r
m
e
r
a
o
m
t
i
n
e
g
t
e
I
r
n
s
O
t
p
r
u
e
c
r
a
t
i
t
o
i
n
n
g
s
I
n
s
t
r
e
p
r
m
e
r
o
a
m
t
i
n
e
g
t
e
I
n
r
s
O
t
p
r
u
e
c
r
a
t
i
t
o
i
n
n
g
s
I
n
s
t
r
e
r
m
o
m
e
t
e
r
O
p
e
r
a
t
i
n
g
I
n
s
t
r
e
r
m
o
m
e
t
e
r
O
p
e
r
a
t
i
n
g
I
n
s
t
r
) to display
) to display
) to set the emissivity, then press Mode key
) or Down key (○
) to set the emissivity, then press Mode key
2
4
2
) or Down key (○
) to set the emissivity, then press Mode key
4
2
) key to change the High Alarm (HAL) or Lo Alarm (LAL), then press Meas.
2
) key to change the High Alarm (HAL) or Lo Alarm (LAL), then press Meas.
2
o
o
o
o
C < LAL 27.1
C, the Low icon will flash and you will hear
C < LAL 27.1
C, the Low icon will flash and you will hear
o
o
C < LAL 27.1
C, the Low icon will flash and you will hear
) and put the probe in/on the target, the thermometer will
) and put the probe in/on the target, the thermometer will
10
10
) and put the probe in/on the target, the thermometer will
10
) or Down key (○
).
) or Down key (○
).
4
2
4
2
) or Down key (○
).
4
2
) for LOCK mode ON/OFF. The lock mode is particularly useful for continuous
) for LOCK mode ON/OFF. The lock mode is particularly useful for continuous
) for
o
C or
o
F transferred.
2
switching.
) for
o
C or
o
F transferred.
2
) for backlight function ON/OFF.
4
) for backlight function ON/OFF.
4
) for laser function ON/OFF. (only for model TN408LC.)
2
) for laser function ON/OFF. (only for model TN408LC.)
2
1.800.393.6434
www.thermoworks.com
u
c
t
i
o
n
s
u
c
t
i
o
n
s
CAUTION
CAUTION
u
c
t
i
o
n
s
u
c
t
i
o
n
s
CAUTION
1. WHEN DEVICE IS IN USE, DO NOT LOOK DIRECTLY INTO THE LASER BEAM–PERMANENT EYE DAMAGE MAY RESULT.
1. WHEN DEVICE IS IN USE, DO NOT LOOK DIRECTLY INTO THE LASER BEAM–PERMANENT EYE DAMAGE MAY RESULT.
1. WHEN DEVICE IS IN USE, DO NOT LOOK DIRECTLY INTO THE LASER BEAM–PERMANENT EYE DAMAGE MAY RESULT.
2. USE EXTREME CAUTION WHEN OPERATING THE LASER.
2. USE EXTREME CAUTION WHEN OPERATING THE LASER.
2. USE EXTREME CAUTION WHEN OPERATING THE LASER.
3. NEVER POINT THE DEVICE TOWARDS ANYONE'S EYES.
3. NEVER POINT THE DEVICE TOWARDS ANYONE'S EYES.
3. NEVER POINT THE DEVICE TOWARDS ANYONE'S EYES.
KEEP OUT OF REACH OF ALL CHILDREN.
KEEP OUT OF REACH OF ALL CHILDREN.
4.
4.
KEEP OUT OF REACH OF ALL CHILDREN.
4.
STORAGE & CLEANING
STORAGE & CLEANING
The thermometer should be stored at room temperature between –20~+65
STORAGE & CLEANING
The sensor lens is the most delicate part of the thermometer. The lens should be kept clean at all times, care should be taken when
The sensor lens is the most delicate part of the thermometer. The lens should be kept clean at all times, care should be taken when
The sensor lens is the most delicate part of the thermometer. The lens should be kept clean at all times, care should be taken when
cleaning the lens using only a soft cloth or cotton swab with water or medical alcohol. Allowing the lens to fully dry before using the
cleaning the lens using only a soft cloth or cotton swab with water or medical alcohol. Allowing the lens to fully dry before using the
cleaning the lens using only a soft cloth or cotton swab with water or medical alcohol. Allowing the lens to fully dry before using the
thermometer. Do not submerge any part of the thermometer.
thermometer. Do not submerge any part of the thermometer.
thermometer. Do not submerge any part of the thermometer.
LCD ERROR MESSAGES
LCD ERROR MESSAGES
LCD ERROR MESSAGES
The thermometer incorporates visual diagnostic messages as follows:
The thermometer incorporates visual diagnostic messages as follows:
The thermometer incorporates visual diagnostic messages as follows:
「
」 「
「
」
「
「
」
BATTERIES
BATTERIES
BATTERIES
The thermometer incorporates visual low battery indication as follows:
The thermometer incorporates visual low battery indication as follows:
The thermometer incorporates visual low battery indication as follows:
'Battery OK': measurements
'Battery OK': measurements
'Battery OK': measurements
are possible
When the 'Low Battery' icon indicates the battery is low, the battery should be replaced immediately with AAA, 1.5V batteries.
When the 'Low Battery' icon indicates the battery is low, the battery should be replaced immediately with AAA, 1.5V batteries.
When the 'Low Battery' icon indicates the battery is low, the battery should be replaced immediately with AAA, 1.5V batteries.
Please note: It is important to turn the instrument off before replacing the battery otherwise the thermometer may malfunction.
Please note: It is important to turn the instrument off before replacing the battery otherwise the thermometer may malfunction.
Please note: It is important to turn the instrument off before replacing the battery otherwise the thermometer may malfunction.
Dispose of used battery promptly and keep away from children.
Dispose of used battery promptly and keep away from children.
Dispose of used battery promptly and keep away from children.
SPECIFICATION
SPECIFICATION
SPECIFICATION
Item
Item
Non-contact Infrared Scan function
Item
Measurement Range
Measurement Range
-60 to +500
Measurement Range
Operating Range
Operating Range
0~50°C (32~122°F)
Operating Range
Accuracy,
Accuracy,
+/-1.0°C (1.8°F)
Accuracy,
(Tobj=15-35°C,Tamb=25°C)
(Tobj=15-35°C,Tamb=25°C)
(Tobj=15-35°C,Tamb=25°C)
Accuracy
Accuracy
Accuracy
+/-2% of reading or 2°C (4°F)
(Tobj=-33-500°C,Tamb=23 +/- 3°C)
(Tobj=-33-500°C,Tamb=23 +/- 3°C)
(Tobj=-33-500°C,Tamb=23 +/- 3°C)
Resolution
Resolution
0.1°C/0.1°F
(-9.9~199.9°C)
(-9.9~199.9°C)
Resolution
Response Time
Response Time
1sec
(90%)
Response Time
Distance:Spot
Distance:Spot
11:1
Distance:Spot
Battery Life
Battery Life
Typ.180, min 140 hours continuous use (Alkaline, without Laser and Back Light.)
Battery Life
Dimensions
Dimensions
175.2 x 39.0 x 71.9mm
Dimensions
Weight
Weight
179 grams including batteries (AAA*2pcs)
Weight
Note: Under the electromagnetic field of 3V/m from 200 to 600 MHz, the maximum error is 10
Note: Under the electromagnetic field of 3V/m from 200 to 600 MHz, the maximum error is 10
Note: Under the electromagnetic field of 3V/m from 200 to 600 MHz, the maximum error is 10
EMC/RFI
EMC/RFI
EMC/RFI
Readings may be affected if the unit is operated within radio frequency electromagnetic field strength of approximately 3 volts per
Readings may be affected if the unit is operated within radio frequency electromagnetic field strength of approximately 3 volts per
Readings may be affected if the unit is operated within radio frequency electromagnetic field strength of approximately 3 volts per
meter, but the performance of the instrument will not be permanently affected.
meter, but the performance of the instrument will not be permanently affected.
meter, but the performance of the instrument will not be permanently affected.
The thermometer should be stored at room temperature between –20~+65
The thermometer should be stored at room temperature between –20~+65
'Hi' or 'Lo' is displayed when the temperature being measured is outside of the settings of
'Hi' or 'Lo' is displayed when the temperature being measured is outside of the settings of
'Hi' or 'Lo' is displayed when the temperature being measured is outside of the settings of
HAL and LAL.
HAL and LAL.
HAL and LAL.
'Er2' is displayed when the thermometer is exposed to rapid changes in the ambient
'Er2' is displayed when the thermometer is exposed to rapid changes in the ambient
'Er2' is displayed when the thermometer is exposed to rapid changes in the ambient
temperature. 'Er3' is displayed when the ambient temperature exceeds 0
temperature. 'Er3' is displayed when the ambient temperature exceeds 0
temperature. 'Er3' is displayed when the ambient temperature exceeds 0
(122°F). The thermometer should be allowed plenty of time (minimum 30 minutes) to stabilize
(122°F). The thermometer should be allowed plenty of time (minimum 30 minutes) to stabilize
」 「
」
(122°F). The thermometer should be allowed plenty of time (minimum 30 minutes) to stabilize
」 「
」
to the working/room temperature.
to the working/room temperature.
to the working/room temperature.
For all other error messages it is necessary to reset the thermometer. To reset it, turn the
For all other error messages it is necessary to reset the thermometer. To reset it, turn the
For all other error messages it is necessary to reset the thermometer. To reset it, turn the
instrument off, remove the battery and wait for a minimum of one minute, reinsert the battery
instrument off, remove the battery and wait for a minimum of one minute, reinsert the battery
instrument off, remove the battery and wait for a minimum of one minute, reinsert the battery
and turn on. If the error message remains please contact the Service Department for further
and turn on. If the error message remains please contact the Service Department for further
「
」
and turn on. If the error message remains please contact the Service Department for further
「
」
assistance.
assistance.
assistance.
'Battery Low': battery needs to be
'Battery Low': battery needs to be
'Battery Low': battery needs to be
are possible
replaced, measurements are still possible
replaced, measurements are still possible
are possible
replaced, measurements are still possible
Thermocouple Probe Scan function
Non-contact Infrared Scan function
Non-contact Infrared Scan function
(K type not included.)
o
o
o
o
-64 to +1400°C (-83.2 to +1999°F)
C (-76 to +932
-60 to +500
F)
C (-76 to +932
F)
o
o
-60 to +500
C (-76 to +932
0~50°C (32~122°F)
0~50°C (32~122°F)
+/-1.0°C (1.8°F)
+/-1% of reading or 1°C (1.8°F)
+/-1.0°C (1.8°F)
greater
(Test under Tamb=23+/-6°C)
+/-2% of reading or 2°C (4°F)
whichever is greater
+/-2% of reading or 2°C (4°F)
0.1°C/0.1°F
0.1°C/0.1°F
(-9.9~199.9°C)
1sec
(90%)
1sec
(90%)
11:1
11:1
12:1
Typ.180, min 140 hours continuous use (Alkaline, without Laser and Back Light.)
Typ.180, min 140 hours continuous use (Alkaline, without Laser and Back Light.)
175.2 x 39.0 x 71.9mm
175.2 x 39.0 x 71.9mm
179 grams including batteries (AAA*2pcs)
179 grams including batteries (AAA*2pcs)
o
o
C (-4~149°F).
C (-4~149°F).
o
C (-4~149°F).
o
o
o
C(32°F) or +50
C
C(32°F) or +50
o
C(32°F) or +50
'Battery Exhausted': measurements are
'Battery Exhausted': measurements are
'Battery Exhausted': measurements are
not possible
not possible
not possible
Thermocouple Probe Scan function
Thermocouple Probe Scan function
(K type not included.)
(K type not included.)
-64 to +1400°C (-83.2 to +1999°F)
-64 to +1400°C (-83.2 to +1999°F)
F)
+/-1% of reading or 1°C (1.8°F)
whichever is
+/-1% of reading or 1°C (1.8°F)
greater
greater
(Test under Tamb=23+/-6°C)
whichever is greater
(Test under Tamb=23+/-6°C)
whichever is greater
o
C ( 18
o
F ).
o
C ( 18
o
F ).
o
C ( 18
o
F ).
Made in Taiwan
Made in Taiwan
Made in Taiwan
Made in China
o
C
o
C
whichever is
whichever is
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ThermoWorks I.R.K.
Summary of Contents for ThermoWorks I.R.K.
- Page 1 Made in Taiwan Made in Taiwan...
- Page 2 This device has been calibrated by temperature and/or resistance standards that are traceable to NIST (U.S. National Institute of Standards and Technology) or NML (National Measurement Laboratory) of Taiwan, and the calibration procedure corresponds with generally accepted regulations and standards. ThermoWorks, Inc. Utah, U.S.A. www.thermoworks.com...
Need help?
Do you have a question about the I.R.K. and is the answer not in the manual?
Questions and answers