Page 1
3101 DRY-BLOCK HEAT/COOL SOURCE USER MANUAL Please read this manual before switching the unit on IMPORTANT safety information inside...
Page 2
TABLE OF CONTENTS 1 INTRODUCTION The 3101 dry-block heating and cooling sources allow users to check the accuracy of thermometers and sensors as a system, 1 INTRODUCTION on site, without the need for heavy, expensive equipment. The dry-blocks are high accuracy portable temperature sources 2 SAFETY that are extremely easy to use.
Page 3
The aluminum temperature well is accessible from the hazard from electric shock. front panel. The dry-well model 3101 is designed to accept five different probe sizes: 1/8" (3.3mm), 5/32" (4.1mm), Connect input power lead to only a 110-115V or 230V, 50-60 3/16"(4.8mm), ¼"...
Page 4
3.2 Operation 3.2.4 Display Units 3.2.1 Dry-Block Set-Up The dry-block is shipped from the factory with display units set to °F or °C. This can be reset at the factory. Call for Place the dry-block unit on a flat level surface with at least 6 details.
Page 5
*Please note: Hole dimensions given are nominal product. Any liability by ThermoWorks is limited only to the replacement of defective materials or workmanship, and Certificate: This instrument has been checked or calibrated...
Need help?
Do you have a question about the 3101 and is the answer not in the manual?
Questions and answers