(7)Set the destination address, destination port, local port, because the mobile phone's goal is to create the
TCP Server computer terminal, so the target address is: 192.168.0.53; target port: 12345; I am here to set the local
port number: 2222 (port 1024~65535);
(8)Click on "connect"
(9)You can see that the TCP&UDP tool interface is changed from
(10)Send character at APP sender: 123456;
(11)Click "send";
(12)you can see the computer side of the TCP&UDP tool to receive the phone to send the "123456";
(13)Click "Send" to send data;
(14)You can see the receiving end of the phone APP received a computer terminal sent "abcdef";
,it indicate the Socket connection successful;
WISNODE-UART WIFI EVB QUICK START GUIDE
Copyright © Shenzhen Rakwireless Technology Co., Ltd
13
to
ETDX170218