Advertisement
2.2.2 Transmission test in STA mode
This part mainly introduced through RAK IOT_V1.0 mobile phone APP and STA mode of the RAK477
module through the transmission test;
1.Configure the RAK477 module to the specified router in accordance with the 2.2 "AP configuration
method for configuring the router to router".
2.Connect the WisNode-Uart EVB to a computer with Micro USB line.
3.The computer is also connected to the same router as the module, I previously demonstrated that the
module will be configured to the wireless network called link router, so the computer is also connected to the link
router;
4.Check the IP address of the computer at this time in the wireless network,and write down. I have a
computer connected to the link network, IP address is 192.168.0.53;
5.To open the TCP&UDP test tool, follow the steps below to create a TCP Server:
（1）Click "CreateServer"；
（2）"Tick" LocalIP，And modify the IP address for the current network IP address of the computer, I fill in
the 192.168.0.53;
（3）I am here to set LocalPort as: 12345 (port number range 1024~65535);
（4）Click "Create"；
（5）Click "StartServer" to start the server so that the computer is ready to do the job;
WISNODE-UART WIFI EVB QUICK START GUIDE
Copyright © Shenzhen Rakwireless Technology Co., Ltd
11
ETDX170218
Advertisement
