Advertisement
Quick Links
WisNode-UART WIFI EVB
Quick Start Guide
Shenzhen Rakwireless Technology Co., Ltd
www.rakwireless.com
info@rakwireless.com
© 2017 Rakwireless all rights reserved.
Mentioned in this document , the actual company and product names,
Trademarks are their respective owners.
After update the new version, this document without prior notice.
WISNODE-UART WIFI EVB QUICK START GUIDE
Copyright © Shenzhen Rakwireless Technology Co., Ltd
ETDX1701061900
Advertisement
Related Manuals for RAK WisNode-UART WIFI EVB
Summary of Contents for RAK WisNode-UART WIFI EVB
- Page 1 WISNODE-UART WIFI EVB QUICK START GUIDE WisNode-UART WIFI EVB Quick Start Guide Shenzhen Rakwireless Technology Co., Ltd www.rakwireless.com info@rakwireless.com © 2017 Rakwireless all rights reserved. Mentioned in this document , the actual company and product names, Trademarks are their respective owners.
-
Page 2: Product Introduction
After buying the Evaluation Kit on RAK Taobao, We will use the following items box send to you,As shown in Figure 1-1. Article in the box as shown in Figure 1-2: A WisNode-UART WIFI EVB,A Micro USB line.If you buy an external antenna EVB, there will be an antenna in the box. -
Page 3: Hardware Introduction
Figure 1-2 1.3 Hardware Introduction As the following Figure1-3 is the WisNode-UART WIFI EVB hardware and hardware distribution.Because the RAK473 module and the RAK475 module peripheral hardware circuit the same. the RAK473 module and the RAK475 module peripheral hardware circuit the same.If you uses the RAK473 module or RAK475 module, you should welded a 0Ω... - Page 4 Serial Port connect methods： （1）When WisNode-UART WIFI EVB used independently or as a host：RXD connect to CTX,TXD connect to CRX； （2）When WisNode-UART WIFI EVB as a slave or plugged into other Arduino board：RXD connect to TX，TXD connect to RX； WPS/MODE key: By default, mode_pin does not enable, short press the button can make the module into the WPS function, can be configured to have WPS function on the router;...
- Page 5 WISNODE-UART WIFI EVB QUICK START GUIDE 2. Use introduction 2.1 Transmission function test in AP mode 1.Connect the WisNode-Uart EVB to computer with the Micro USB line; 2.Open the serial debugging assistant，choose corresponding serial number and set the baud rate,as shown in figure 2-1;...
- Page 6 WISNODE-UART WIFI EVB QUICK START GUIDE 4.Open the TCP&UDP test tool,according to the following steps to create a TCP-Client,and complete the Socket two-way transmission experiment; <1>Step 1：Right mouse click“Client Mode”，choose“CreateConnection”； 2-1-3 <2>Parameter setting：Step 2：Set the communication type“TCP”;Step 3：DestIP is set to “192.168.7.1”,this is RAK477 WiFi module IP address；...
- Page 7 WISNODE-UART WIFI EVB QUICK START GUIDE <3>Step 6 ： Click “Connect” ， This icon state changed from ，this indicates that the Socket connection is successful； 2-1-5 <4>Enter the character to be send at the TCP-Server end ： Step 7 ： Enter what you want to send ， like “abcdef”;Step 8：...
- Page 8 WisNode-UART EVB by RAK IOT_V1.0 mobile phone （Android APP Download address https://www.pgyer.com/rakiot）; 1.Download and install RAK IOT_V1.0 APP,And power up WisNode-Uart EVB; 2.Mobile phone search module AP hot and connected to confirm that the phone connected to the module hot after the installation of the installation of the APP, according to the following steps to start the configuration：...
- Page 9 WISNODE-UART WIFI EVB QUICK START GUIDE Step 4: after entering the APP, you can see that APP has been searching for the MAC address as "60C5A8679318" RAK477 module; Step 5: click “add device"; Step 6: click "next" to enter the AP configuration interface;...
- Page 10 WISNODE-UART WIFI EVB QUICK START GUIDE Step 7: fill in the router's name and password, and click the button of to search for the wireless network in the current environment; Step 8: click "configure"; Step 9: I will connect the module to the wireless network name "link" router, you can see the interface prompts me to switch to the just configured "link"...
- Page 11 WISNODE-UART WIFI EVB QUICK START GUIDE 2.2.2 Transmission test in STA mode This part mainly introduced through RAK IOT_V1.0 mobile phone APP and STA mode of the RAK477 module through the transmission test; 1.Configure the RAK477 module to the specified router in accordance with the 2.2 "AP configuration method for configuring the router to router".
- Page 12 WISNODE-UART WIFI EVB QUICK START GUIDE 6.Open the RAK IoT.V1.0 APP, follow the steps below to start the operation: （6）After opening APP, you can see that APP has been scanned into our RAK477 device; click on this device Icon ；...
- Page 13 WISNODE-UART WIFI EVB QUICK START GUIDE （7）Set the destination address, destination port, local port, because the mobile phone's goal is to create the TCP Server computer terminal, so the target address is: 192.168.0.53; target port: 12345; I am here to set the local port number: 2222 (port 1024~65535);...
- Page 14 WISNODE-UART WIFI EVB QUICK START GUIDE Want to know more information about RAK477, please visit the official website to download Ruike Huilian details(Official Website http://www.rakwireless.com/en/download) Copyright © Shenzhen Rakwireless Technology Co., Ltd ETDX170218...
- Page 15 WISNODE-UART WIFI EVB QUICK START GUIDE 3. Modification Records Edition Author Date Modification content V1.0 Wenyong.tang 2017/04/19 Creating document Copyright © Shenzhen Rakwireless Technology Co., Ltd ETDX170218...