Specifications - Panasonic CQ-5302U Operating Instructions Manual

Specifications

❐ General
Power Supply:
Current consumption:
Maximum Power Output:
Tone adjustment range:
Bass:
Treble:
Power Output:
Suitable Speaker Impedance:
Dimensions (W × H × D):
Weight:
❐ FM Stereo Radio
Frequency Range:
Useable Sensitivity:
50 dB Quieting Sensitivity:
Frequency Response:
Alternate Channel Selectivity:
Stereo Separation:
Signal/Noise Ratio:
❐ AM Radio
Frequency range:
Usable sensitivity:
❐ Weather Band Radio
Frequency range:
Usable sensitivity:
Signal/Noise Ratio (40 dB/µV):
❐ CD Player
Sampling Frequency:
DA Converter:
Error Correction System:
Pick-Up Type:
Light Source:
Wavalength:
Frequency Response:
Signal to Noise Ratio:
Wow and Flutter:
Channel Separation:
Above specifications comply with EIA standards.
Note: Specifications and the design are subject to modification without notice due to improvements in technology.
12 V DC (11 V-16 V) test Voltage 14.4 V, Negative ground
Less than 2.5 A (CD mode, 0.5 W 4-speaker)
37 W × 4 channels at 400 Hz, Volume Control maximum
± 12 dB at 100 Hz
± 12 dB at 10 kHz
18 W per channel into 4 ohms, 40 to 30 000 Hz at 3 % THD
4-8 Ω
178(W) × 50(H) × 155(D) mm {7" × 1
1.7 kg {3 lbs. 12 oz}
87.9-107.9 MHz
12 dBf. (1.1 µV/ 75 Ω, S/N 30 dB)
17 dBf. (1.8 µV/ 75 Ω)
30-15 000 Hz ±3 dB
75 dB
35 dB at 1 kHz
70 dB (Mono)
530 kHz–1 710 kHz
28 dB/µV (S/N 20 dB)
162.40 –162.55 MHz
3 dB/µV (S/N 20 dB)
50 dB
8 times oversampling
MASH•1 bit/4 DAC System
Spot size detection method
3-beam
Semiconductor laser
790 nm
20 - 20,000 Hz (±1 dB)
85 dB
Below measurable limits
75 dB
Power Output:
18 W RMS x 4 Channels at 4 Ω and ≤ 1%
THD+N
Signal to Noise Ratio:
85 dBA (reference: 1 W into 4 Ω)
" × 6
15 1
/ / "}
16 8
CQ-5302U
51