Table of Contents
Advertisement
Caution
• We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
• When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure your hands
and fingers.
First complete the electrical connections, and then check them for
The included Mounting Collar q is designed specially for this unit. Do not use it to attach any other model.
Power Connector
Mounting springs (C)
Engage the Mounting
Springs (C) in the
mounting holes of the
Mounting Collar q
firmly.
Mounting Spring
correctness.(a
Insert Mounting Collar q into the
1
dashboard, and bend the mounting tabs
out with a screwdriver.
The tabs to be bent vary depending on
the vehicle. To securely install the unit,
fully bend a number of the tabs so that
there is no rattling.
Example:
q Mounting
Collar
Mounting Holes
Mounting Bolt
Establish the rear connection of the unit.
2
After fixing Power Connector, fix the rear of the unit
to the vehicle body by either method (a) or (b)
shown in the previous page.
3
After installation reconnect the negative
(–) battery terminal.
Mounting
Hole
page 47)
Tab
CQ-5302U
45
Hide quick links:
Advertisement
Table of Contents
