Table of Contents
Advertisement
≥Manual Focus Mode
≥The shutter speed, Iris and White Balance cannot be
operated.
≥The Sports Mode [5], the Portrait Mode [7] and Low
Light Mode [4] are cancelled.
≥It is not possible to use [WIPE], [MIX] or [TRACER] of
[EFFECT1] together with the digital modes of [EFFECT2]
on the [DIGITAL EFFECT] Sub-Menu
≥If you have set [EFFECT2] to [B/W] or [SEPIA], changing
the selected White Balance Mode is not possible. (l 23)
≥When [PROGRESSIVE] on the [CAMERA SETUP] Sub-
Menu is set to [ON], the digital modes of [EFFECT1] on the
[DIGITAL EFFECT] Sub-Menu cannot be used. (l 39)
ª Wipe Mode and Mix Mode
If either one of the following operations is carried out, stored
images will be erased, and Wipe and Mix Functions cannot
be used.
≥Use the Camera Search Function
≥Press the [STILL] Button
ª Playing Back
Repeat Playback
If you continue to press the [1] Button for 5 seconds or
longer, the Movie Camera switches to Repeat Playback
Mode, and the [R !] Indication appears. (To cancel Repeat
Playback Mode, set the [OFF/ON] Switch to [OFF].)
Listening to Playback Sound through Headphones
When you wish to listen to playback sound through
headphones, connect the headphones to the [PHONES]
Socket on the Movie Camera. In this case, no sound
(including a warning sound and shutter sound) will not be
reproduced through the built-in speaker of the Movie
Camera.
Choosing Sound during Playback
(NV-DS38 only)
You can select the sound by using the [AUDIO OUT] setting
on the [PLAYBACK FUNCTIONS] Sub-Menu.
STEREO:
Stereo Sound (main sound and sub sound)
L:
Left channel sound (main sound)
R:
Right channel sound (sub sound)
≥If you dub a tape recorded at the [12bit] selected as the
[AUDIO REC] setting, playback sound becomes stereo
sound regardless of whether [12bit AUDIO] is set to [MIX]
or to [AUDIO OUT].
ª Index Search Functions
≥Index Search may not be possible at the beginning of tape.
≥Because Photoshot Index Signals are not recorded on still
pictures recorded in Continuous Photoshot Mode, the
Photoshot Index Search Function cannot be used for these
still pictures.
≥Scene Index Search may not function properly if the
interval between 2 scene index signals is shorter than 1
minute.
ª Playback Digital Effect Functions
≥Signals of images to which digital effects are added during
playback cannot be output from the DV Terminal (l 7) or
Digital Still Picture Terminal (l 32).
≥You cannot use the Wipe or Mix Function while playing
back the non-recorded portion of tape.
ª Playback Zoom Function
≥You cannot adjust the sound volume with the Remote
Controller in Playback Zoom Mode.
≥If you turn off the Movie Camera power or if you switch from
VCR Mode to Camera Mode, Playback Zoom Mode is
automatically cancelled.
≥Even if Playback Zoom Functions are being used, images
that are output from the DV Terminal (l 7) or Digital Still
Picture Terminal (l 32) are not enlarged.
≥As you enlarge an image, the quality of image suffers.
ª Playing Back on Your TV
≥If you play back a Cassette recorded with copyright
protection signals, the screen becomes black.
≥If you set [AV JACK] on the [AV IN/OUT SETUP] Sub-Menu
to [IN/OUT] with NV-DS38, nothing will be shown on the TV
screen except during playback.
ª Audio Dubbing
≥The blank section of a tape cannot be dubbed.
≥Sounds sent through the DV Terminal cannot be dubbed.
≥If a tape has a non-recorded portion when the tape is
dubbed, images and sounds may be disturbed when this
portion of the tape is played back.
≥If you set the tape counter back to 0 at the position where
you want to stop Audio Dubbing so as to make it possible to
use the Memory Stop Function (l 47), Audio Dubbing is
terminated automatically when the tape reaches this
position.
≥In the case of importing data recorded with Audio Dubbing
to a PC using the PC's software programme, only the
original sound (ST1) may be imported, depending on the
software programme.
ª Recording the Contents of Other
Equipment
Recording to a Card
If you set the [TAPE/CARD] Selector to [CARD], you can use
the Card Photoshot function for external input signals.
≥Black streaks may appear at the 4 edges of the image.
≥When the [PHOTO SHOT] Button is pressed, the image
may seem to move backward momentarily, but this does
not affect the recording.
Analog-Digital Conversion
≥When the Movie Camera is connected with other digital
video equipment through its DV Terminal, images recorded
in analog form from other external equipment can be output
to the digital video equipment through the DV Terminal.
≥To DV-output analog video signals sent from other
equipment, set [DV OUT] on the [AV IN/OUT SETUP] Sub-
Menu to [ON]. (Normally, keep the [DV OUT] set to [OFF]. If
it is set to [ON], the quality of the image may be disturbed.)
ª Using the DV Cable for Recording
(Digital Dubbing)
≥If you set the [TAPE/CARD] Selector to [CARD], you can
use the Card Photoshot function for external input signals.
≥Regardless of the setting, digital dubbing is carried out
automatically in the same audio recording mode as that of
the Cassette on the playback-side.(NV-DS28/DS38 only)
≥The images on the monitor of the recording side may be
disturbed, but it does not affect the recorded images.
≥Even if Playback Digital Effects, Playback Zoom, or
Playback Title In have been used, these effects are not
output from the DV Terminal.
≥Even if you use device equipped with DV Terminals (such
as i.LINK), you may not be able to perform Digital Dubbing
in some cases.
ª Autoprint
≥When the cooling function of a video printer has been
working and the printing speed is dropping, Autoprint may
stop. When this happens, set [AUTO PRINT] to [YES] once
more.
≥If you replace the Ink Cassette or paper during printing, the
same picture may be printed twice.
41
Hide quick links:
Advertisement
Table of Contents
