Philips DCM3100 Service Manual page 6

All manuals and user guides at all-guides.com
TECHNICAL DESCRIPTION
2X60W
GENERAL PART
Output Stage Protection:
INDICATORS
VFD DISPLAY W/BACK-LIGHT
Power Standby Mode:
ELECTRICAL DATA
DSC: NA
DBB Yes
IS: NA
MAX: NA
VEC: NA
Level Difference:
Tuner: FM 67.5 kHz Modulation.
CD: -6 dB track(Audio Disc 1 ,Trk 35)
Ipod&Iphone: 500mW
Aux : 500mV; Rs=600Ω
Input Sensitivity (±3dB)for Rated Output Power at 1KHz
Microphone Sens: NA
Channel Difference:
Hum (VOL1 to default value):
Residual Noise (Volume Minimum)
Channel Seperation: 40dB at 1KHz /35dB at 16KHz /30 dB at 20KHz
signal to noise ratio :
OUTPUT POWER(6 ohm Loading)
Mains Operation :
Frequency Response
LOUDSPEAKER(BOXES)
Rated Impedance : Left/Right:
Matrix: NA
REMARKS
(*1) Deviations from PQR
(*2)
Electronical Parameters are to be measured at speaker terminal across
input singal in cd mode setting in DBB Off unless specified otherwise.
Revise
Name:
Check:
Temperature:
'+/-3 dB
3 dB
200 nW
:
60 nW
65 dBA
2 X 25W(NORMAL)
25W-
1dB(LIMIT)
100Hz ~ 16KHz within +3/-3dB
6Ω @ 100 Hz ~ 15kHz
CD MICRO SYSTEM DCM3100
Date:2010-08-15
Date:
Yes;
Support Disc
CD-DA CD-R/RW MP3
Headphone Out: 2.5 mW - 2 dB , R Load = 32 ohm @ max
0dB, 1kHz CD
Acoustic Hum Noise in dB (Volume = 1):
ipod&iphone Compatibility: iPod 5G, iPod nano 1G/2G/3G,
Classic, iPod Touch, iPhone included 3GS Iphone4 Ipad
ipod&iphone charging : 1000mA
Shock sens.: >3g
At cold condition with 10%THD 1KHz
(@ REF output )
ohm load with
SET SPECIFICATION
Tot.Sh.: 7 SHEET 4
30dB (Euro & Nafta)
33dB (Apac & Latam)