Connecting External Components - Panasonic AG-DVC80P Operating Instructions Manual

Connecting external components

$ When connecting an audio component, set
the INPUT1 switch or INPUT2 switch to the
LINE position.
The input level is 0 dBu; the recording level
is adjusted using the AUDIO controls.
$ When connecting an external microphone,
set the INPUT1 switch or INPUT2 switch to
the MIC position.
OSet the input level (–50 dBu and –60
dBu) using the MIC GAIN 1 and MIC
GAIN 2 items on the setting menu
RECORDING SETUP screen.
OWhen mounting an external microphone
on the microphone shoe of the camera
recorder, use the accessory microphone
holder and microphone holder adapter.
INPUT 2
OTo supply the signals from an external
microphone to CH1 and CH2, connect the
external microphone to the INPUT2 jack,
and set both the CH1 SELECT and CH2
SELECT switches to the INPUT2 position.
(See page 16)
Microphone
holder
Microphone
holder adapter
6 mm
(XSB4+6FZ)
CH 1 SELECT CH 2 SELECT
INT(L)
INT(R)
INPUT 1
INPUT 2
INPUT 2
12 mm
(XSB4+12FZ)
49