6.3.
Pairing the earphones
via Bluetooth®
Enable Bluetooth on your audio
output device.
Remove both earphones from the
charging cradle.
The earphones will switch on automat-
ically. The operating LEDs on the left
earphone will then fl ash alternately red
and blue and the operating LED on the
right earphone will fl ash blue.
The earphones are now ready for Blue-
tooth pairing.
The device name of the earphones
"MD 80055" will be displayed in the
device list on your audio output device
as soon as the signal is found.
Pair both devices with your audio
output device.
After successful pairing, a confi rmation
beep sounds in the left earphone.
81