Model: WINA
Rated Voltage: 100-240V~
Frequency (Hz): 50/60Hz
Rated Wattage: 80W
Length of A.C. Cord: 9 ft.
Weight (less cord): 11.7 oz.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING.
DANGER – Every appliance is electrically live, even when the
switch is off. When not in use, always unplug the iron to prevent
the risk of fire.
WARNING – To reduce the risk of burns, electrocution, fire, or
injury to persons and/or personal property:
• Use the iron only for the purpose described in this guide
to prevent accidents, damage, or malfunction.
• This appliance should never be left unattended when
plugged in.
• Avoid multiple cables to a plug or use of an extension cord
to prevent starting a fire from overheating.
• KEEP AWAY FROM WATER to prevent fire, electric shock,
damage, or malfunction.
• KEEP AWAY FROM CHILDREN.
• Do not handle the iron or cord with wet hands, as this may
cause electric shock.
• Do not leave the iron in a position where it can fall or be
pulled into a tub or sink.
• Keep the cord away from heated surfaces.
• DO NOT WRAP THE CORD AROUND THE IRON.
• Never place or insert objects on the iron plates due to the
risk of causing fire, accidents, or malfunction.
• Do not operate where oxygen is being administered to
avoid the risk of fire.
• DO NOT USE WHEN CORD HAS BEEN DAMAGED OR IF
PLUG IS LOOSE.
• DO NOT REPAIR, TAMPER WITH, OR TRY TO
RECONSTRUCT the iron, otherwise electric shock,
malfunction, or accidents may result.
• When inserting or pulling out the plug, hold the plug firmly
to prevent the cord from peeling and to prevent accidents
or malfunction.
• Stop using immediately if you smell an offensive odor. If
ignored, it could cause a fire or other accidents.
• Do not keep the iron in a damp place, such as a bathroom,
or it may malfunction.
• Stop using the iron and remove from the power source
when there is an earthquake or thunder.
• Unplug the iron from the power source when cleaning or
wiping to prevent fire or electric shock.
GENERAL SPECIFICATIONS
Need help?
Do you have a question about the Protools Express Ion WavePress and is the answer not in the manual?