Paul Mitchell Pro Tools turnstyle+ Instructions, Safety And Warranty Manual

INSTRUCTIONS, SAFETY AND WARRANTY GUIDE
Cut your styling time in half without straining your wrist. Unlike
traditional curling irons, the Express Ion TurnStyle+ features
a unique rotating barrel that creates beautiful curls with the
touch of your fingertips. Style hair quickly and easily in three
simple steps:
1. Prep two-inch sections of hair with a thermal protection
spray such as Paul Mitchell
2. Holding the barrel at a 45-degree angle, open the clamp
and place hair inside at the point where you want the curl
to begin. Close clamp.
3. Wrap the loose end around one side of the iron and use
your thumb and index finger to spin the rotating barrel.
Press the power button once to turn on. To adjust heat setting,
use the + or – button. The curling iron has reached your selected
temperature when the numbers on the LED or digital display
screen begin to flash. Once you have finished curling, press the
power button to turn off and unplug the tool. This iron is intended
for professional and consumer use. This iron has a polarized plug
(one blade is wider than the other). As a safety feature, this plug
will fit into a polarized outlet only one way. If the plug does not fit
securely, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
TEMPERATURE SETTINGS
185 - 235°F (85 – 113°C)
235 - 285°F (113 – 140°C)
285 - 335°F (140 – 168°C)
335 - 410°F (168 – 210°C)
Model: CT10NAB20
Rated Voltage: 110-240V
Frequency (Hz): 60Hz
Rated Wattage: 30W
Length of A.C Cord: 9 ft. / 2.7 m
Weight: 9.1 oz (0.569 lbs.) / 258g
OPERATING INSTRUCTIONS
GENERAL SPECIFICATIONS
Hot Off The Press
®
HAIR TYPE
Fragile
Fine
Medium
Thick
.
®