Advertisement
Bend the 1.5mm music wire to the shape of the gear and epoxy it on the
bulkhead. Add the wheels. Cut the windshield out of thin plastic sheeting and
glue it on the ceiling, the 2 struts and the front top of the fuselage. Use
contact glue. Make 4 balsa struts for the horizontal tail. The locations are
visible on the picture above. They are 3x2mm in cross section.
Attach the "rigging tower" onto the wing. I used the wing mounting screws to
attach the tower. Insert small pieces of tubing in the wings to create hard
points for the thread. Rig your plane as shown on the picture.
Advertisement
