Preparing A Memory Card; Supported Memory Cards; To Load A Memory Card - Casio Exilim EX-H10 User Manual

NOTE
• Each country controls its local time offset and the use of summer time, and so they
are subject to change.
• Removing the battery from the camera too soon after configuring time and date
settings for the first time can cause the settings to be reset to their factory defaults.
Do not remove the battery for at least 24 hours after configuring settings.

Preparing a Memory Card

Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
• For information about memory card capacities, see page 170.

Supported Memory Cards

– SD Memory Card
– SDHC Memory Card
Use one of the above types of memory card.

To load a memory card

1.
Press [ON/OFF] to turn off the camera
and then open the battery cover.
Slide the battery cover slider towards OPEN
and then open it as indicated by the arrows in
the illustration.
2.
Load a memory card.
Positioning the memory card so its front is
facing upwards (towards the monitor
screen side of the camera), slide it into
the card slot all the way in until you hear it
click securely into place.
Front
18
1
2
Front Back
Quick Start Basics