Advertisement
Quick Links
Advertisement
Related Manuals for TecnoVideo 254 Series
Summary of Contents for TecnoVideo 254 Series
- Page 1 254 Series Extra-Large size Stainless Steel Camera Housing Installation manual Issue 0510...
- Page 2 The 254 series is designed to protect CCTV cameras in outdoor locations, especially where corrosive environment can cause the premature deterioration of a standard aluminium/plastic camera housing, for this purpose the 254 series is constructed entirely from AISI316L stainless steel. MODELS Camera housing (L=600mm).
-
Page 3: Installing The Housing
INSTALLING THE HOUSING Before performing any operation, turn off the power. Only qualified personnel can perform electrical operations according the regulations in force. Prior to installation and operation, read carefully this manual of instructions. 1. Extract the rear flange by removing the eight screws and the corresponding washers. - Page 4 5. Only on housings with heater system. Perform the input and output (to the camera) voltage connections using the PCB installed inside the housing near the rear flange. 6. Only on housings with wiper system Perform wiper electrical connections through the three coloured wires connected to the wiper mechanism mounted on the rear flange.
- Page 5 Length measure for models with sunshield, heater and wash wiper Length measure for models with sunshield and heater Dimensions in millimetres – Design and product specifications subject to change without notice TECNOVIDEO S.n.c. Via San L. Murialdo, 8 36030 Villaverla (VI) ITALY Tel. +39.0445.350444 Fax +39.0445.357259...