DESCRIPTION The 101W Series camera housing is constructed entirely from AISI316L stainless steel, for use in industrial and marine environments and in general where a corrosive atmosphere can cause a rapid deterioration of a standard aluminium-steel housing. Sunshield, thermostatically controlled heater and ceiling mounting bracket are included.
Page 3
Fix the housing’s bracket to the wall using suitable screws. Loose the three sunshield’s screws and remove the sunshield, sliding it forward and pulling it up. Rotate the housing cylindrical body anticlockwise. DO NOT REMOVE the front window cover. Mount the camera on the internal rail using the 1/4" screw supplied. Feed the cables through the cable gland and perform the electrical and video connections according to the instructions in the camera installation manual.
Page 4
TECNOVIDEO S.r.l. Via San L. Murialdo, 8 36030 Villaverla (VI) ITALY Tel.