JVC SP-X100 Service Manual page 3

Disassembly method
The speaker box of this model is a unit supply.
Therefore, we do not supply it as individual parts though
the method of disassembling the speaker box has been
described.
Removing the Ornament Panel (See Fig.1)
1. Remove the six hooks a attaching the ornament
panel from front side. In that case, ornament panel is
fixed with the adhesive, and remove the ornament
panel by using a minus driver etc. , please.
Removing the front panel (See Fig.2 )
Prior to performing the following procedure, remove
the ornament panel.
1. Remove the two screws A attaching the front panel.
2. Pull out the front Panel. In that case, front panel is
fixed with the adhesive, and remove the front panel
by using a minus driver etc. , please.
Removing the speaker (See Fig.3 to 4)
Prior to performing the following procedure, remove
the ornament panel. and front panel.
1. Disconnect the speaker wire from speaker terminal.
Remove the four screws B attaching the speaker.
2.
All manuals and user guides at all-guides.com
Front panel assembly
Speaker
terminal
Ornament Panel
a
Fig.1
B
A
Fig.2
Front panel assembly
Fig.3
B
B
Fig.4
SP-X100/SP-CR100
SP-R100
a
Speaker
wire
Speaker
B
B
1-3