Table of Contents
Advertisement
Top panel
1
LINE OUT level knob
output level of the
LINE OUT
2
PHONES LEVEL knob
output level of the
PHONES
3
MIDI IN indicator
data is being received at the
nector.
NOTE
A device that transmits the MIDI Active
Sense message will cause this indicator
to blink constantly. To stop the blinking,
disable the use of MIDI Active Sense on
the sending device, if possible.
3
MIDI OUT indicator
MIDI data is being transmitted from the
connector.
MIDI OUT
2 – Parts of the US-144
Controls the
jacks.
Controls the
jack.
Lights when MIDI
con-
MIDI IN
Lights when
4
Lights to indicate a
USB indicator
valid USB connection to the host computer.
5
MON MIX balance knob
the balance of the signal sources being out-
put from the
LINE OUT
jack. When this knob is turned to
PHONES
the far left, the signal being input to the
US-144 (from the XLR jacks, or 1/4" phone
jacks) will be output. When this knob is
turned to the far right, the output signal
received from the computer via USB will
be output.
6
Turn this switch
MONO switch
if you want to monitor in monaural. This
switch affects only the analog input signal.
Controls
jacks and the
ON
7
TASCAM US-144
Advertisement
Table of Contents
