Installation; System Requirements; Windows; Mac Os X - Tascam US-144 Owner's Manual

3 – Installation

System requirements

Windows

Supported operating system:
32-bit Windows XP SP2 and 32-bit
Windows Vista
Recommended system:
Athlon 1 GHz or faster (or equivalent pro-
cessor), 512 MB or more memory, USB 2.0
port
These requirements are for when using
Cubase LE4. If you are using other appli-
cation software, you will need to consult
the operating requirements for the software
you are using.
NOTE
The number of usable audio tracks will
depend on the speed of your hard disk.
The faster your hard disk, the better
your results will be.

Mac OS X

• Macintosh computer with a USB 2.0
connector
• Mac OS X 10.3.9 & higher on PowerPC
Mac systems
10
TASCAM US-144
Pentium or AMD
If the US-144 is operating with a USB 1.1
(Full Speed) connection, only two chan-
nels of recording/playback will be avail-
able.
We recommend that you have at least
512 MB of memory, but when using dig-
ital audio application software, the
more memory you have the happier you
will be.
Although this product has been checked
for use with typical computers that meet
the above operating requirements, we
cannot guarantee that it will operate
with all computers that meet these
requirements. Please be aware that even
under the same conditions, processing
capability may vary depending on differ-
ences of the design and system.
For Macintosh as well, the more memory
you have and the faster your hard disk, the
happier you will be when using digital
audio application software