Ports; Connecting The Dlan 200 Avpro Wp; Installation Of Devolo Software; Devolo Dlan 200 Avpro Manager For Windows - Devolo dLAN 200 AVpro WP Manual

2.3.2

Ports

b
b
2.4

Connecting the dLAN 200 AVpro WP

This section describes how to connect your dLAN 200 AVpro WP to a computer
or to a network.
2.5

Installation of devolo software

2.5.1

devolo dLAN 200 AVpro manager for Windows

The installation wizard installs the devolo dLAN 200 AVpro manager configu-
ration software as well as the associated manual on the Windows operating
system.
b
Network connection:
This is the connection point on the dLAN 200 AVpro WP for connecting it to
a computer or another network device with the network cable.
Integrated electrical socket
If you connect additional network devices using a multiple socket, plug this
multiple socket into the electrical socket of the dLAN 200 AVpro WP. The
integrated mains filter eliminates any noise of connected devices and signif-
icantly improves data transmission in the network.
Use the included network cable to connect the dLAN 200 AVpro WP to the
network port of your running computer or other network device.
Plug the dLAN 200 AVpro WP into a wall socket.
Additional network devices that are connected via a multiple socket are con-
nected to the mains power supply by plugging the multiple socket into the
integrated electrical socket of the dLAN 200 AVpro WP.
Once you have connected at least two dLAN 200 AVpro WP adapters as
described in and
up. To protect your dLAN network individually from unauthorised access,
you should first write down the security IDs of the dLAN devices. This
unique identifier of each dLAN device is located on the label on the housing.
Then continue with installation of the devolo software.
devolo dLAN 200 AVpro manager encrypts your dLAN network individu-
ally and thus secures it against unauthorised access.
, your dLAN 200 AVpro WP network has been set
|
Initial use
|
devolo dLAN 200 AVpro WP
13
|