Instructions For Turning Off The Laser System; Front & Rear Panel; Product Specification - Pro Audio Trade BEAM BOX 5W Manual

8.2 INSTRUCTIONS FOR TURNING OFF THE LASER SYSTEM

1. Turn off the key switch. (We recommend having a professional operator to keep the keys, the
3-pin interlock plug and E-STOP BOX.)
2. Turn off the power to the projector via the power switch.
8.3 FRONT & REAR PANEL
NO. Name
1
Laser aperture
2 DMX interface
3 FB4
4 ILDA out
5 Power ON/OFF
6
3-pin interlock
7
Key switch
8 Power in and out

8.4 PRODUCT SPECIFICATION

Voltage
Power rate
Unit dimensions
Net weight
Total laser output
Laser source
Scanner system
Working temperature
Cooling system
Laser output, do not look directly into this aperture
For FB4 DMX control
FB4 control system, with Ethernet and SD card
To transfer FB4 signal output with ILDA interface
Power switch
The 3-pin XLR bridging plug supplied has to be plugged into the
interlock socket in order to be able to activate the laser.
Key switch for laser output
AC100~240V power input and output sockets. With output feature
you can connect the device to one another using the input and
output sockets. They must be the same fixtures. DO NOT mix fixtures!
AC 100~240V, 50/60Hz, T3A
250W
238*246*163mm (without the bracket)
8KG
5W
1200mW Red 638nm; 1700mW Green 525nm; 2200mW Blue 455nm
30kpps@ILDA 8
10~40℃
Fan cooling
Function
7