Technische Informatie: Onderhoud En Service; Algemene Reinigingsinstructies: Door Gebruiker Uit Te Voeren - Pro Audio Trade BEAM BOX 5W Manual

Laser show system
Table of Contents

Advertisement

Available languages

Available languages

Kanalen
waarde
30,31
0-
65535
32
0-255
3)
33
0-255
34
0-255
35
0-255
36
0-255
37
0-255
38
0-255
39
0-255
MEER INFO & VIDEO TUTORIAL OVER FB4 MODULE IS TE VINDEN OP DE PANGOLIN FB4 WIKI PAGINA

9 TECHNISCHE INFORMATIE: ONDERHOUD EN SERVICE

ALGEMENE REINIGINGSINSTRUCTIES: DOOR GEBRUIKER UIT TE VOEREN

Vanwege mistresten, rook en stof moet de externe behuizing van de projector regelmatig worden
gereinigd om de lichtopbrengst te optimaliseren. De reinigingsfrequentie is afhankelijk van de
omgeving waarin het armatuur werkt (rook, mistresten, stof, dauw). Bij zwaar clubgebruik raden wij
aan om maandelijks te reinigen. Periodieke reiniging zorgt voor een lange levensduur en een scherpe
output.
 Haal de stekker uit het stopcontact.
 Wacht tot het product koud is.
 Gebruik een zachte, vochtige doek om de buitenkant van de projector af te vegen.
 Gebruik perslucht en een borstel om de koelopeningen en ventilatorrooster(s) schoon te vegen.
 Reinig de glasplaat (laseropening) met glasreiniger en een zachte doek als deze vuil is.
 Poets het glasoppervlak voorzichtig totdat het vrij is van waas en pluisjes.
 Zorg er altijd voor dat alle onderdelen volledig droog zijn voordat u de stekker weer in het
stopcontact steekt.
functie
beschrijving
Y Position
Allows for changing the vertical position of the cue limited
by setup mode
(Range -100 till 100%, center = 32768)
Scan Rate
Defines the painting speed of the laser beam.
(5k till original 30K)
Red
Intensity range from 0 till 100%
Green
Intensity range from 0 till 100%
Blue
Intensity range from 0 till 100%
Alpha
Allows you to shift between original cue color or RGB
control.
(Range, 0 = original, 1-255 = 0 till 100% alpha blending)
Points start
Allows you to remove points from the start point of a cue
(Range from 100 till 0% visibility)
Points End
Allows you to remove points from the end point of a cue
(Range from 1000 till 0% visibility)
Strobe
0 = Strobe disabled
1-255 = Strobe from 1 to 20 Hz
https://wiki.pangolin.com/doku.php?id=hardware:fb4
Breedte
16 Bit
8 Bit
8 Bit
8 Bit
8 Bit
8 Bit
8 Bit
8 Bit
8 Bit
16

Advertisement

Table of Contents
loading

Table of Contents