Mechanical; Mounting Orientation; Enclosure Requirements; General Requirements - Eaton CROUSE-HINDS Series Instruction Manual

4
Figure 2b - F880-CL and F880-CR Carrier
The Shield Ground Option is available on revision D.0 and later units.
4

MECHANICAL

4 .1

Mounting Orientation

The F880-Cx carriers are designed for mounting on a vertically aligned DIN-rail on a
vertical surface. This method of mounting ensures optimum heat dissipation from the
Power Modules.
4 .2

Enclosure Requirements

4 .2 .1

General Requirements

The assembly may be mounted in hazardous (classified) areas – see Sections 8 & 9.
The following conditions must also be satisfied to ensure safe and reliable operation.
a) Prevent any form of pollution that could compromise the operation of the unit.
For example, choose an unpolluted location or a suitable enclosure to protect the
assembly.
b) Provide an adequate level of mechanical protection. This can be achieved by
selecting a protected location, a suitable enclosure, or a combination of both.
c) Ensure that all cable entries and connections are secure by making provision for
the careful routing and securing of all cables.
d) Provide adequate security against unauthorized interference.
INM F880 Rev 1