See www.vornado.com/circulators-manuals to view, - Do not run cord under carpeting. Do not cover cord with throw download and print the most current version of these instructions.
Page 5
3. Risk of Fire. Replace fuse only with 2.5 Amp, 125 Volt fuse as electrician. Do not attempt to defeat this safety feature. approved by Vornado Consumer Service. For an authorized - Before moving, repositioning, servicing, cleaning and when not replacement fuse, please contact Vornado Consumer Service.
Page 6
- Contact Vornado Customer Service or dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003.
FEATURES Save energy by maximizing the performance of heating and cooling systems. When you use a Vornado Air Circulator, you will not have to set your summertime thermostat as low or your wintertime thermostat as high. DIRECTABLE MULTIPLE SPEEDS AIRFLOW...
CONTROLS Manual controls are located on the back of the product. Press to power unit ON or OFF. There are four speeds: Press (I) for low speed. Press (II) for medium speed. Press (III) for high speed. Press (IIII) for turbo speed. You can also control the product with Amazon Alexa.
FACTORY RESET: If for any reason, there is a problem with your product or you wish to disconnect the product from your network you can reset it to factory settings. Simply press and hold the TURBO and POWER buttons for 10-15 seconds or until the product beeps 4 times. To reconnect your Vornado 660 AE, follow steps above. English...
USING ALEXA Once connected to Amazon Alexa, your 660 AE can be controlled via your voice with any Alexa Echo device or the Alexa App on your phone. To control your product, use simple voice controls like: "Alexa, turn ON / OFF the fan."...
3. To reattach - position the Front Grille so the Vornado logo in the center of the Front Grille is straight. Replace all the screws. Use the brush attachment on your household vacuum cleaner to vacuum any accumulated dust off the Front Grille and Air Inlets.
Page 12
CLEANING BLADE REMOVAL Pliers recommended. WARNING: Always unplug device before servicing or cleaning to avoid possible injury due to remote activation of the product. To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing blade. 1.
Under certain conditions, it is possible for a reset GFCI (Ground Fault Circuit Interrupter) outlet to trip when the user is changing speeds on a Vornado circulator. In this event, change to an outlet that is not connected to a GFCI device.
Vornado, at its discretion, will repair or replace the Product at no cost. parts is not recommended and any consequences will not be covered by support services or product warranties.
Page 15
Vornado Air, LLC 415 East 13th Street, Andover, Kansas 67002 800.234.0604 | vornado.com Amazon, Echo, Alexa, and all related logos are CL3-0766 R-, V01 trademarks of Amazon.com, Inc. or its affiliates.
Need help?
Do you have a question about the 660 AE and is the answer not in the manual?
Questions and answers