How To Use - GeekChef GCF20C User Manual

BEFORE FIRST USE
1. Rinse the water tank. Remove the water tank lid and fill the water tank with cold
water up to the MAX level of the tank.
2. Insert the plug into a wall outlet with suitable voltage.
3. Press the Power button, the Power indicator light turns on and the coffee machine
starts to preheat automatically. Once the preheating is finished, the Steam Ready
indicator will turn blue.
This preheating process takes about 2 minutes.
Place a big cup under the steam wand. Turn on the Steam control knob,then press
4.
the Espresso button. Let the waterflow out of the steam pipe about 80 ml, then
press Espresso button again and turn off the Steam control knob. This process is
let the water flow into the empty pump for the first use.
Note :
running first time. It's normal for a 20 bar pump. The noise will be
weak in the future using. It is recommended to run the machine
without coffee grounds at least once before the first use. This
process will help to clean and preheat the appliance.
5. Insert the Filter into the Filter holder
1
6. Insert the Filter Holder without coffee grounds into the Brew unit with a 45°move-
ment to the left and turn it to the right to lock it in place. The filter holder handle
must be perpendicular to the machine or slightly tilted towards the right.

HOW TO USE

There will be a noise and little shake when the machine
2 3
5