Sony VAIO PCV-W Series Service Manual page 23

DISASSEMBLY DISASSEMBLY
19 19
Give folding to flexible flat board Give folding to flexible flat board
LEX-48 board LEX-48 board
To Flowchart To Flowchart
Detents Detents
Precautions during installation. Precautions during installation.
When performing the air-blowing When performing the air-blowing
on the acrylic panel, perform it on the acrylic panel, perform it
starting from center toward starting from center toward
outside. outside.
TOP TOP FOR SAFETY FOR SAFETY
Flexible flat cable Flexible flat cable
(LED) (LED)
Aluminum tape Aluminum tape
1 1 (W600M/W700M) (W600M/W700M)
Ground plate Ground plate
(Upper) (Upper)
3 3
2 2
Flexible flat cable (LED) Flexible flat cable (LED)
3 3
4 4
LEX-48 board LEX-48 board
DISASSEMBLY DISASSEMBLY
FRAMEHARNESS FRAMEHARNESS
LCD unit, LCD chassis assy LCD unit, LCD chassis assy, ,
and others. and others.
Aluminum tape Aluminum tape
Ground plate Ground plate
(W700M) (W700M)
3 3
(Upper) (Upper)
2 2
1 1
Ground plate Ground plate
(Lower) (Lower)
3 3
Ground plate Ground plate
(Lower) (Lower)
EXPLODED VIEW EXPLODED VIEW
ql ql
LEX-48 BOARD LEX-48 BOARD
Removal procedure Removal procedure
1 1 Remove the
Remove the
four screws. four screws.
7-682-647-01 7-682-647-01
2 Peel off the aluminum tape. 2
Peel off the aluminum tape.
(W600M/W700M) (W600M/W700M)
3 3
3 Disengage the fourteen 3
Disengage the fourteen
detents, and remove the detents, and remove the
two two Ground Ground plates (Lo plates (Lower),
two Ground two Ground plate (Upp plate (Upper),
LCD unit, LCD chassis LCD unit, LCD chassis
assy, and others. assy, and others.
4 Disengage the three 4
Disengage the three
detents, remove the detents, remove the
LEX-48 board, and remove LEX-48 board, and remove
the Flexible flat cable (LED). the Flexible flat cable (LED).
Detents Detents
PARTS LIST PARTS LIST
+PS (3 X 6) +PS (3 X 6)
Gold Gold
wer),
er),